Power for all

Power supplies from Phoenix Contact can be used throughout the world due to wide-range input and international approval package, high operational reliability owing to long mains buffering under full load and high MTBF (Mean Time Between Failure ) > 500,000 h, increase in capacity and redundancy due to parallel connection, simplified startup through "On-site" function monitoring.

A welcome addition to QUINT POWER

Comprehensive range of products for industrial power supplies

QUINT POWER is the universal power supply with a comprehensive range of products, incl. special variants and accessories. DC-UPS uninterruptible solutions with 10, 20 or 40 A as well as a maintenance-free buffer module are also available. Excellent features of the power supply units are:

  • Reliable starting of heavy loads with high inrush currents through Power Boost power reserve
  • Worldwide use in all industrial areas due to large approval package, e.g. ship permit GL
  • High operational reliability even in the event of a permanent failure in one of the three phases
  • Active function monitoring through switching output and preventive function monitoring through potential-free relay contact for remote diagnosis


Long and problem-free service life

For all 24 V power supplies from the Quint Power Series, Phoenix Contact now has the approval of the American Bureau of Shipping, ABS, one of the leading classification companies for ships and other maritime applications in the world.
Application in the maritime environment places high demands on the technology with regard to climatic and mechanical loads as well as electromagnetic compatibility. Therefore, the approvals from the ABS and Germanic Lloyd, GL, classification companies stand for long and problem-free service life for the power supplies.


Supplements:

With the Quint Power 24V/40A power supply, Phoenix Contact expands its range of single-phase network devices. The wide range of input voltage from 85 to 264 VAC and 120 to 350 VDC convinces in worldwide use.
The output voltage between 22.5 - 29.5 VDC can be set to match the relevant application. With the Power Boost power reserve, the power supply unit delivers an output current of 45 A at rated voltage and 60°C ambient temperature. Thus, loads with high inrush currents can be started without problem. In case of a short-circuit in the consumer, secondary-side fuses are reliably triggered with the high short-circuit current.



The Quint DC-DC converter 24VDC/24VDC/10A is suitable for consumers that need a regulated 24 V output voltage. It converts DC voltages from 18-32 V DC to an adjustable and regulated 24V output voltage.
Sensitive consumers need a constant voltage for safe operation. Therefore, an adjustable output voltage of 22.5 to 28.5 V is generated from a non-regulated DC voltage. This is practical, for example, in output voltages of non-regulated transformers or fluctuating battery-supported power supply networks.
If the DC-DC converter is combined with same type of power supplies from the Quint Power series, the result is a redundant configuration of different power supply networks.
In addition, the module enables the galvanic separation of two DC networks.



The Quint Power Power Supply 48V/10A and 48V/20A are now available immediately for single-phase power supply networks. Thus, Phoenix Contact expands its large range of special voltages. The output voltage between 30 - 56 V DC can be set to match the relevant application. With the Power Boost power reserve, the devices deliver 13 A and 22.5 A output current. Thus, loads with high inrush currents are started reliably and in the case of a short-circuit in the consumer, reliably trigger secondary-side fuses with the high short-circuit current.
48 V power supplies provide for a low power dissipation with long conductor routes. For example, they are suitable for motors that start reliably even with torque increased through contamination.


Your advantages at a glance

  • Worldwide application thanks to the wide-range input and international approval package
  • High operational reliability due to long mains buffering under full load and high MTBF (Mean Time Between Failure) > 500,000 h
  • Parallel connection possible for increased performance and redundancy
  • Simplified startup due to "On-site" function monitoring


Further information and services related to this article



Phoenix Contact Pty. Ltd.
130-140 Parraweena Road
Miranda NSW 2228

PO Box 2351
Taren Point NSW 2229 Australia

Customer Service: 1300 786 411
Fax: 1300 723 399
customerservice@phoenixcontact.com.au